Security Command R500 Bedienungsanleitung PDF herunterladen (Seite 2)

Publication 1757-RN516A-EN-P - April 2004

2 ProcessLogix R500.1 SP1 and R510.0 Station Update 4

Installation

This section details the installation of this update.

Before You Begin

Before beginning the installation, you must download the following

file to your ProcessLogix Server(s) and Client(s):

• Station R2.0 Build 460.exe

The following software components must be installed before you

install this update:

• Windows 2000 Service Pack 3 or 4, or Windows XP

• Internet Explorer v6.0 or 6.0 SP1

• ProcessLogix R500.1 SP1 or R510.0

Server Installation

You must complete this procedure on all Servers in your ProcessLogix

system.

If you have a redundant Server pair, you must complete the following

procedure on SERVERB first, then repeat the procedure for SERVERA.

Be certain that SERVERA is the Primary Server before beginning the

installation.

The station settings files, default.stn and factory.stn,

will be overwritten during this procedure. To retain

the current settings files, copy them to another

location before performing this procedure and copy

them back after the procedure has been completed.

The settings file are located in

C:\Honeywell\Client\Station.

1. Close all running applications.

2. Using Windows® Explorer, go to the directory where the update

was downloaded, double-click Station R2.0 Build 460.exe to

extract the files to C:\Station R2.0 Build 460.

3. Click Star t ⇒ Settings ⇒ Control Panel.

4. Double-click the Add/Remove Programs icon.

5. Select “HMIWeb Station and Display Builder”.

TIP

1 2 3 4 5 6 7 ... 10 11

Keine Kommentare

Security Command R500 Bedienungsanleitung Seite 2