Security Command XR200 Bedienungsanleitung PDF herunterladen (Seite 3)

SPEC SHEET

POWER LED

ARMED LED

Built-in

Speaker

Securit

Command Ke

Easy-to-read

English display

Large, backlit

function keys

WIRELESS ZONES

Using a 472 Inovonics 900MHz Interface

Card on the XR200 panel allows you to add

up to 200 zones of 900 MHz spread

spectrum wireless to the system. The 472

provides a

3-wire connection to an FA400 Receiver.

The FA426 Remote Wireless Receiver also

allows you to add up to 16 points of

Inovonics 900MHz wireless transmitters to

your system. This module connects to

either the LX-Bus™ or the keypad bus and

is programmed using an Inovonics FA116

Executive Programmer.

The 738A Ademco Wireless Expansion

Module allows you to add up to 32

supervised zones of Ademco series 5881

wireless devices to your system. Connect

the 738A to either the LX-Bus™ or the

keypad bus and program from any DMP

alphanumeric keypad.

CROSS ZONING

This powerful feature allows multiple

zones to be cross-zoned and report alarms

only when two or more are tripped within a

programmable time. Should one zone trip,

a fault report is sent to the central station.

SCHEDULES

The XR200 provides you with flexibility in

system operation by offering the following

three types of programmable schedules:

PRIMARY AND SECONDARY

SCHEDULES

These schedules are for such applications

as late to close annunciation and auto

arming. You can also program primary and

secondary schedules to track users with 1

and 2 authority levels who arm and disarm

the system outside of their allowed times.

PERMANENT AND TEMPORARY

SCHEDULES

Permanent schedules are similar to primary

and secondary and are intended for regular

use. Temporary schedules allow restricted

access to trade or delivery people after

business hours.

OUTPUT SCHEDULES

Output (relay) schedules allow you to

automatically turn on or off any of the

panel’s relay or powered outputs. This

feature allows you to control temperature

sensors, exterior lighting, or any

contact-activated device.

200 USER CODES

You can assign up to 200 custom user codes

in the XR200 panel. Customizing user codes

allows you to select the system functions

and keypad displays each user can access.

You can select standard authority level

that provides 9 fixed levels of access.

The first user code in each partition can

also be programmed as an ambush code

that sends a silent alarm when entered at

a keypad.

200 EVENT MEMORY

The XR200 stores up to 200 user and

system events you can view or print at any

time through the keypad User Menu. The

Display Events feature allows you to view

stored openings and closings, zone events,

user code and schedule changes, door

accesses, and supervisory events.

OUTPUTS

The XR200 can provide two SPDT relay

outputs and eight 12 VDC 50mA powered

outputs with an optional plug-in relay and

a 430 Wire Harness connected to the

panel. Each relay is rated at 1.5 Amps at

30 VDC or 500mA at 120 VAC.

BUILT-IN PROGRAMMER AND

DIAGNOSTICS

The XR200 contains its programmer on-

board and does not require an external

programmer. This allows installers and

service technicians to program the panel

and run the panel’s system diagnostics

program from any keypad.

SECURITY COMMAND

KEYPAD

You can connect any DMP Security

Command keypad to the XR200 panel. Each

keypad has large function keys for entering

information and a fluorescent blue or LCD

display that allows users to view system

events in almost all lighting conditions.

EASY ENTRY™ WIEGAND

KEYPADS

For low cost access control, DMP has

developed the Easy Entry™ access system

that allows you to connect the 793 keypads

with built-in proximity readers. You can

also connect external proximity and

magnetic stripe access readers to a 791 or

793 Easy Entry keypad.

CODELESS ARMING AND

DISARMING

Users can now enjoy codeless arming and

disarming of systems using Easy Entry, yet

still have individual activity with their user

number logged into the panel’s event

memory.

SOFT SHUNT™

To provide an entry and exit window on

systems with 24-hour perimeter

protection, DMP has developed the Soft

Shunt™ feature that can shunt zone two on

the keypad for 30 seconds while the user

enters or leaves the building.

REQUEST TO EXIT

This feature allows you to automatically

release a door strike or magnetic lock with

the 791 and 793 Easy Entry keypads, and

the 733 Wiegand interface module by

connecting a motion sensing or mechanical

device to zone three. As the user trips the

zone, the keypad activates its door strike

relay allowing the user to exit the

protected area without having to present a

card to the access control reader.

FOUR PROGRAMMABLE ENTRY

DELAY TIMES

Delay zones on the XR200 can be assigned

any of the four programmable entry

delays. You can program these entry times

for 1 to 250 seconds in 1-second

increments.

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Security Command XR200 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Security Command XR200